LabStrobeTM STB100-F
Compact, Economical LED Stroboscope
|
 |
|
|
 |
LabStrobe LED Stroboscope Description |
 |
 |
 |
 |
|
LabStrobe STB100-F is a hand held LED stroboscope used to measure the speed of rotation or frequency of vibration of a fan, motor, speaker, other mechanical part or system. The latest in LUXEON LED technology provides this pocket sized stroboscope with unparalleled brightness and battery life at this price point.
|
Stroboscopes have the advantage of not loading or disturbing the equipment under test. Mechanical equipment may be observed under actual operating conditions. Parasitic oscillations, flaws, and unwanted distortion at high speeds are readily detected.
The LabStrobe LED Stroboscope is ideal for field work, test benches, laboratories, universities and repair facilities. |
|
|
LabStrobe LED Stroboscope Specifications |
 |
|
|
- Size: 4.9" (124mm) x 2.8" (71mm) x 1.3" (33mm)
- Power: 3V (2 AA Batteries included)
- Brightness: 370 LUX @ 50 cm (19.7"), 6,000 FPM
- Six button membrane for easy operation
- Flash rate adjustment (4 buttons)
- Coarse: Multiply by 2, divide by 2
- Fine: Up & Down (1-15 FPM increments)
- Flash phase adjustment (2 buttons)
- Up & Down, 0-360° adjustment
- Flash rate range in FPM: 60 - 99,990
- Flash rate range in Hz: 1 - 1,666
- Flash rate accuracy:
- 60 - 17,300 FPM: +/- 1 LSD
- 17,300 - 99,990 FPM: +/- .009%
- Typical Alkaline battery life: 11 hours
- Operating temperature: 14° to 122°F (-10° to 50°C)
- Tripod mountable (1/4 - 20 UNC thread)
- Weight: 6.1 oz (173 grams), batteries included
|
|
LabStrobe LED Stroboscope Features |
|
|
|
- Lightweight, pocketsize design
- Battery powered for portability
- Low battery indicator
- Flash rate recall: On power up, the last flash rate that was displayed
for 3 seconds or more is shown on the display
- Two high brightness PHILIPS LUXEON® LEDs
- No costly lamp to replace
- No heat generation
- Ultra high efficiency for longer run time
- Fast response rate
- Immune to mechanical shock and vibration
- Silent operation
- Storage bag included
- Optional tripod - Order P/N TP1-F
- RoHS compliant
- EN55011 Class B: 2004/08/EC Compliant
- Warranty: 2 years
- Made in the USA
|
|
LabStrobe LED Stroboscope Part Numbers |
|
|
|
| Part Number |
Description |
| STB100-F |
LabStrobe LED Stroboscope |
| TP1-F |
(optional) Tripod |
|
|
|
Use the links below for addtional manual pages or for a complete manual or click on the Operation/Installation Manual PDF link above.
|
LabStrobe STB100-F LED Stroboscope
 |
